FAD-5.1 5.1CH Dolby Digital / DTS decoder

( ODM/OEM are Welcome )  ( Click To Enlarged Image )

  

A. Introduction

     This is a pre-amplifier which can decode 5.1CH Dolby Digital / Dolby Pro LogicⅡ / DTS with dot matrix LCD panel.

B. Features

     1) TWO optical fiber S/PDIF input.
     2) TWO Coaxial S/PDIF input.
     3) THREE pair RCA Jack stereo analog audio input.
     4) Dolby Digital / Dts / Pro Logic Ⅱ decoding.
     5) Dolby PLⅡ music and Dolby PLⅡ Movie surround mode supported.
     6) Individual channel level trim.
     7) Dot matrix LCD panel.
     8) Center channel delay time supported.
     9) Rear channel delay time supported.

C. Specification

     1) Input Impedance
         Coaxial ……………………………………………………………………… 75Ω
         Line-In (analog in) ………………………………………… 10KΩ

     2) TWO Coaxial S/PDIF input.
         Digital Input ………………………………………………………………< 0.02 %
         Analog Input………………………………………………………………< 0.02 %

     3) THREE pair RCA Jack stereo analog audio input.
         Digital Input…………………………………………………………………> 85dB
         Analog Input…………………………………………………………………> 80dB

     4) Dolby Digital / Dts / Pro Logic Ⅱ decoding.
         Digital -20dBFS
         Analog 200mV

     5) Dolby PLⅡ music and Dolby PLⅡ Movie surround mode supported.

     6) Rear channel delay time supported.

         Satellite Channel……………………………………………………………140Hz – 20KHz
         Subwoofer Channel……………………………………………………… 20Hz – 140Hz

D. Front panel description

     1) Power On/Standby Switch: Power on/standby button switch.
     2) Power On/Standby Indicator: Power on/standby red color LED to display power status
         (power on indicator off, power standby indicator on).
     3) Dot Matrix LCD: All functions message display on LCD panel.

E. Back panel description

     1) DC Power Jack: +12V / 650mA power supply adaptor.
     2) Optical Jack: Optical fiber S/PDIF digital audio input.
     3) Coaxial RCA Jack: Black color RCA jack for S/PDIF digital audio input.
     4) AUX-1 RCA Jack: Stereo analog audio input.
     5) AUX-2 RCA Jack: Stereo analog audio input.
     6) AUX-3 RCA Jack: Stereo analog audio input.
     7) FL/FR RCA Jack: Front left/right analog audio output.
     8) SL/SR RCA Jack: Surround left/right analog audio output.
     9) Center/Subwoofer Jack: Center and Subwoofer analog audio output.

F. Remote handset description

     1) Power On/Standby: Power on/stand-by controls function.
     2) Mute: Audio output muting on/off function.
     3) VOL+/VOL-: Master volume controls and function value adjusted.
     4) Input: Input source select, selected from OPTICAL, COAXIAL, LINE-IN.
     5) Level : Individual channel level trim controls / Test tone (press this key to select which channel
         cyclically for volume adjustment meanwhile press VOL+/VOL- key to adjust level increase or decrease.
     6) Delay: Center and rear delay setup, press this key to select which channel for delay time adjustment
         meanwhile press DTIME+/DTIME- to adjust delay time increase or decrease.
     7) Surround: Surround mode select, user can select different surround mode such as Dolby Pro LogicⅡ Music,
         Dolby Pro LogicⅡ Movie and Multi channel surround mode depend on input source data format.
     8) speaker: choose the speaker set up (2.1CH, 3.1CH, 5.1CH to match the surround mode selected).